AM4xS - Counterweight
Print Profile(2)
![[X1C] 0.2mm layer, 2 walls, 10% infill](https://makerworld.bblmw.com/makerworld/model/US34fb7847d06ab6/338453328/instance/2025-06-27_0848e157b77308.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
![[H2D] 0.2mm layer, 3 walls, 10% infill](https://makerworld.bblmw.com/makerworld/model/US34fb7847d06ab6/338453242/instance/2025-06-27_efdec49545a3c.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
Description
Because of how modular my AM4xS - AMS SLIDING Stacking System is, I have separated the print profiles into multiple different models. It would simply be impossible to include all the various different options in a single print profile as there would be too many plates.
This model is for the “counterweight”. Depending on the size and location of your stack, you may have issues with the stack wanting to tip forward when you pull one of the AMS slides out. This counterweight attaches to the bottom of your stack, in the back, to help hold your stack. You can fill the counterweight with sandbags, or you can go to your local hardware store and pick up four standard 8"x4"x2.25" (200mmx100mmx60mm) paving stones, they are very cheap, about $0.70 each.
You can find other models I have released for the BambuLab printers here:
https://makerworld.com/en/u/2811301167/collections/109412
=====
If you appreciate my models, please consider buying me a coffee!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (27)