Printable Book Stand

GeckoGrid is now in pre-launch on MakerWorld Crowdfunding.
Follow the campaign to support the launch, get notified when it goes live, and stay updated as new features and stretch goals are revealed.

📚 3D Printable Book Stand – Adjustable with Wooden Dowels

Designed by Lilith3DPrint

This is a simple, strong, and budget-friendly book stand that you can fully customize. Instead of paying £20 for a flimsy wooden version, you can print this one for a fraction of the cost!

📏 Model Overview:

• What’s Included:
  • Two side legs
  • One optional middle support (for longer shelves)
• Dowels Used:
  12mm wooden dowels – available here:
  👉 Trustleaf 12mm x 600mm Birch Wooden Dowels (Amazon Link)

(You can cut the dowels to any length you need)

• Hole Size:
  13mm to comfortably fit 12mm dowels, even if they’re painted or slightly oversized.

🛠️ Assembly Instructions:

1. Insert the dowels into one side leg.
2. Turn the assembly so the dowels are facing upwards.
3. Press the other leg onto the dowels.
4. Add the optional middle leg for longer stands.
5. Normally this is a tight press-fit, but you can add glue if you want a permanent setup.

✅ Print Settings:

• 3 Walls
• 15% Gyroid infill
• Brim recommended
• Print support-free in the provided orientation.

This model is designed for practical, everyday use — easy to print, simple to assemble, and ready to handle your favorite books!

Thanks for scrolling all the way down — you’re officially a real one 🫶
Your support makes this possible and keeps creators like me designing through midnight prints and caffeine crashes.

💛 Want to support more?
Buy Me a Coffee 

PayPal 

Patreon

🧭 Check out more models:

MakerWorld Profile

Thangs3D Profile