H2D Pulley Motor Dust Cover - Free 3D Print Model

Search models, users, collections, and posts

Ocular Dynamic

3D Printer>3D Printer Parts

IP Report

GIF

Print Profile(2)

All

H2D

X1 Carbon

P1S

A1 mini

P1P

X1E

H2D Pro

0.2mm layer, 2 walls, 15% infill

Designer

38 min

1 plate

4.9(29)

[ABS] 0.2mm layer, 20% infill (gyroid)

56 min

1 plate

5.0(2)

Open in Bambu Studio

Boost

285

232

138

Released

Description

I noticed the pulley and bearing on the back-right belt motor of the H2D was exposed to dust and debris, which could eventually cause performance issues. To help prevent this, I made a simple dust cover that slides right over top of the motor pulley assembly.

The cover mounts using the small holes already present above and below the pulley—no modifications required. Just print and slide it into place.

Key Features:

Protects pulley/bearing from dust and debris
Uses existing motor housing holes for easy, secure fit
No screws or adhesives needed

Material Recommendation:
Since this part sits inside a heated chamber, be sure to print it in a high-temperature filament like at least PETG or ABS / ASA...etc to ensure it holds up.

Boost Me (for free)

This you found this useful, place share a boost. Thanks!

Comment & Rating (33)

@Rick269

Print Profile

0.2mm layer, 2 walls, 15% infill

very good design, does what it says it's going to do.

@kongkoka

Print Profile

0.2mm layer, 2 walls, 15% infill

Fit great.

@Extrudissimo

Print Profile

0.2mm layer, 2 walls, 15% infill

Fits perfectly Printed in PETG

Show original

@UmKkuk

Print Profile

0.2mm layer, 2 walls, 15% infill

good.!

@Kamaeleo

Print Profile

0.2mm layer, 2 walls, 15% infill

Nice!

(Edited)

@team_c0ulter

Print Profile

[ABS] 0.2mm layer, 20% infill (gyroid)

Perfect fit!! Printed in black ABS.

The profile uploader has replied

@Kamaeleo

Thanks for the rating!

@user_3284418994

Print Profile

[ABS] 0.2mm layer, 20% infill (gyroid)

The profile uploader has replied

@Kamaeleo

Thanks for the rating!

@Markus_F

Print Profile

0.2mm layer, 2 walls, 15% infill

I printed the part in ASA and it fits perfectly for its intended purpose

Show original

@Robin06

Print Profile

0.2mm layer, 2 walls, 15% infill

Passt perfekt

@ScenicEye

Print Profile

0.2mm layer, 2 walls, 15% infill

Excellent way to protect your H2D, H2S, H2C

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.