Switch 2 Joycon Grip for Dbrand Killswitch Case

I've been loving the new Killswitch case for my Nintendo Switch 2 and wanted a joycon grip that best fit the size of the joycons with the grips installed, so I made this! Again, this joycon grip is made specifically for joycons with the Killswitch case! Although it would work with normal joycons, it would look odd 😅

That said, this model does NOT require an AMS to print as all of the colors parts can be printed individually and then glued together (thats what I did!). The only thing that is required is a set of 12 individual 6mm x 2mm magnets (n52 preferred). I used these magnets here: https://www.amazon.com/dp/B0F4KS6KV3?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Even with the magnets, it will not hold the joycons nearly as strong as the normal switch does, but it holds them enough to be completely usable without issue!

Lastly, I LOVE making my prints look as clean as possible, so the print profile is using a .1mm layer height, which definitely adds to print time. Although Ive not printed this model with a .2 layer height, I imagine it would work without issue!