Atari 2600 Raspberry Pi 4/5 Case - Free 3D Print Model

Search models, users, collections, and posts

Alpaca823

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

P1S

P1P

H2D

P2S

H2D Pro

X1E

H2C

X1 Carbon

H2S

X2D

A2L

0.2mm layer, 6 walls, 25% infill

Designer

24.9 h

4 plates

5.0(1)

Open in Bambu Studio

Boost

127

343

141

Released

Description

This Raspberry Pi case is modeled after the iconic Atari 2600 game console. This case features a case fan mount on the underside of the top, venting holes and optional TPU feet.

Comment & Rating (13)

@1MansCollection

Boosted

Had to make some modifications to get it to print correctly as the writing was missing from the first print direct from the file. I printed in PLA and had to add the red back into the print as it was black, white and orange only. Printed with the top on an angle (as pictured) so that the writing was smooth and clear. (raised writing depth level as it was below the surface) Printed on a Bambu Labs A1 with AMS 0.2mm nozzle (0.10mm Standard) top 32hr19m base 24hr10m I added supports set to: Tree(auto) Tree Strong 30 degree threshold Build on plate only Support critical regions only Remove small overhangs. Pictures show both final print and first attempt. I might try again with the top placed back down flat on the plate but with fixed writing so it shows up. This would use much more filament than on the angle I used but I did have a slight warping on the right edge, maybe due to not enough support and the 32 hour print time. Printed as a Vader clone so removed the orange box line.

The designer has replied

@Alpaca823

thanks for the rating and the boost. I will look into the writing missing in the model.

@Alpaca823

fixed the text.

@user_4127817212

Boosted

Great design!

@user_953990074

What screw sizes and mm fan was used for this?

The designer has replied

@Alpaca823

for the case fan it was the raspberry pi case fan. I had wire extensions. and for the screws I used m2.5 with heat inserts.

@user_953990074

Replying to @Alpaca823 :

Thank you! This is super helpful!

@Kreat0r

Awesome print!

@PiercePrints3D

Is this supposed to snap together?

The designer has replied

@Alpaca823

nope. it’s not a tight fit it just sits on top with a little wiggle.

@1MansCollection

Boosted

well done worth a boost

@not_a_robot_25

Verry cool!

@1MansCollection

Boosted

Print Profile

0.2mm layer, 6 walls, 25% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.