Business Card Box / Visitenkartenbox - Free 3D Print Model

Search models, users, collections, and posts

mrsretronintendo

Household>Office

IP Report

Print Profile(3)

All

X1 Carbon

P1P

H2S

H2D Pro

P1S

H2D

P2S

X1E

H2C

A1 mini

X2D

A2L

0.2mm layer, 3 walls, supports

Designer

1.2 h

1 plate

4.5(303)

V2 EU + US Standard Size

Designer

2.4 h

2 plates

4.9(39)

American Version

1.5 h

1 plate

4.8(46)

Open in Bambu Studio

Boost

1143

3206

493

163

7.5 k

5.6 k

Released

Description

Content has been automatically translated.

Show original

Update V2

The V2 now has thicker walls and the entire model is significantly more stable

Additionally, a US version has been added to print plate 2 of the V2, which is longer because EU and US business cards have different standard dimensions

Thanks for your feedback :)

This is a lockable business card box so you can have business cards with you on the go. Standard business cards fit here

I would be very happy about a rating or comment

This is a lockable business card box so you can have business cards with you on the go. Standard business cards fit here

I would be very happy about a rating or comment

All my models are free. However, I would be happy if you supported me at the following link on Ko-fi.
You can also boost the model.

Boost Me (for free)

Comment & Rating (493)

@LToyC

Print Profile

0.2mm layer, 3 walls, supports

I stretched the model by 5% on the length axis to accomodate USA standard business cards which are 3.5" x 2". Overall, nice model. The walls are thinner than I expected which has a bit of flex, but it's not a huge deal. Just can't toss it around.

@peckinpaw

Print Profile

American Version

I just could not get this to adhere to the build plates. I tried the textured, smooth, and super tack plates on the X1C, with automatic bed leveling activated -- I even tried glue on one of my attempts. I'm sure it's a good model, but it just wouldn't print right for me.

The profile uploader has replied

@Woody87

Boosted

I personally use cheap dollar store hair spray. wash the plate with hot water and dawn dish soap. dry the plate with a paper towel. hold plate 12 to 14 inches away as you evenly lightly coat the plate with the pump hair spray. use a new paper towel to wipe in a circular motion the excess hair spray off the plate. when cool it pops off, when hot it sticks like glue.

(Edited)

@13altazar

did you ever get it to work? I tried printing this today and got the same issue. I will be trying again with brim ears on all shar corners

@peckinpaw

Replying to @13altazar :

Yes, I used the mouse ears setting in the slicer and that worked.

@user_1675210199

Print Profile

0.2mm layer, 3 walls, supports

Strength Issue:Flimsy holder. Does not snap together well. Alight squeeze bends the case. Definete worry that long term use will scatter cards

Other Issues:Literally does not fit a business card (see photo). They had to be turned sideways. additionally, supports were a pain to remove. Can be improved by orienting model to remove supports, making walls thicker, and stronger.

The profile uploader has replied

@retronintendo

Thanks for your feedback. I just uploaded version V2. It also includes a US version, since US business cards have different standard sizes. Additionally, the walls are now significantly thicker and the whole model is much more stable.

@user_588395141

Fantastic model! My only complaint would be that the finger cutout is not exactly in the middle ;)

The designer has replied

@retronintendo

Oh you are right. I will fix this. Thank you :)

@retronintendo

I've corrected the model now. Thank you for this very important information. I hadn't noticed it before.

@DangerousDibs

Print Profile

0.2mm layer, 3 walls, supports

The concept is good but the overall strength of the design is a little weak and the cover keeps coming off. I intend to remake this but thicken the walls slightly and increase the size of the notch the connects the pieces together.

The profile uploader has replied

@retronintendo

Thanks for your feedback. I just uploaded version V2. The walls are now significantly thicker and the whole model is much more stable.

@MartinMajewski

Super practical and easy to print on the A1 Printed in PETG red FormNext 2024 can come Top P.S: Improved with a bit more contrast

(Edited)

The designer has replied

Show original

@retronintendo

Turned out very well It's a shame I won't be at FormNext But I'm glad my business card holder made it there 👍

Show original

@MartinMajewski

Replying to @retronintendo :

If someone asks me about it, I will kindly refer them here! :-)

Show original

@3dVanReeth

Print Profile

0.2mm layer, 3 walls, supports

just what I need, but for my card, it would be more handy that the entire card is more visible.

The profile uploader has replied

@retronintendo

Thank you 😊

@SandraM

Print Profile

V2 EU + US Standard Size

So I absolutely LOVE these. I got my Printer less than a month ago, and one of my focuses was prints to make my art festival vending easier and more efficient. One of my difficulties? I had business cards that I just put out on the table, would shove into a bag at the end; and then next time was never sure where they were, or if I had enough. I printed 3 of these in my logo colors. added my business name; and put my cards in. Now, when I go, it's easy to check that all 3 are full (knowing I will have enough) for the Festival, AND the cards have a nice display on the table. At the end, I just close the boxes, put them back in my "GO" box (essentials for each Festival), and refill is easy. Thanks so much. They printed and work great.

The profile uploader has replied

@retronintendo

Thank you very much :)

@LiAn1992

The print profile is no longer public

I am pleased with this 3D-printed model The print with the P1S worked flawlessly and the result looks excellent The details are crisp and the surfaces are smooth The model is well-designed and the print file runs without issues I highly recommend this model Many thanks Linus

Show original

@HarveyJAtelier

Print Profile

0.2mm layer, 3 walls, supports

joint is not solid enough, it keep coming off

The profile uploader has replied

@retronintendo

Thanks for your feedback. I just uploaded version V2. The walls are now significantly thicker and the whole model is much more stable.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Jeep Kit Card

agepbiz

71.2 k

22.1 k

Cascade card wallet V2

Hugo

53.6 k

14 k

T-Rex Skeleton Kit Card

Fletch

42.5 k

15.2 k

GIF

Business Card Box // Visitenkartenbox 85x55

DocLex

4.2 k

738