Oakley Holbrook Red White And Blue

Based on the Streetwear-Style DIY Sunglasses, 3D Printable by @M3mento. But I wanted them patriotic themed for the 4th of July. They are surprisingly durable and feel like good quality. The lenses I used can be found here https://www.amazon.com/dp/B0CHJFZ78G.

🔧 Assembly Instructions per @M3mento

• Use a piece of 1.75mm filament as a hinge pin: insert it through the hole in the temple arm, gently heat one end with a lighter and press it in so it locks in place. (you can also use a m2x12 screws but the rod hole needs to be slightly enlarged.
• To install the lenses, snap them in from the inside using a bit of hand pressure – no tools required, just a little patience.