Modular Frames - A bundle of 3 geometric patterns

Hey people! :)

Since lots of you loved my previous design, “Endless Frame”, but wanted it in other styles than Victorian Gothic, I decided to create a bundle of three minimal, geometric, and Art Deco patterns for it. 

The idea behind them is still the same: Each design comes in 3 main pieces (Corner, Straight Long, and Straight Short), which are infinitely repeatable! You can print as many of them as you need, and they effortlessly attach to create a frame in any size.

• The corner and the straight short piece have a length of 5 cm, and the straight long piece has a length of 10 cm. Calculate the length and width based on your need, and duplicate (or clone) the pieces to achieve your desired dimension.
• If you want a thicker frame, you can scale up the pieces altogether to about 150%. However, due to the change in tolerances, you have to use glue to secure them at the connection points.

To print & assemble perfectly:

- The uploaded profile is for the smallest variation, a 15x20 cm picture frame.

- Reduce the infill percentage to 5% to get a light, easy-to-mount frame.
- You can use a 0.2 mm layer height for all three patterns.

- Turn on the supports option.
- Let the pieces cool down completely before assembly. You can use a bit of glue to remove any potential wiggle between the joints.

Hope you like it, and happy printing! :)🥂

✨If you enjoyed this project and want more modular, vintage-looking home accessories, check out my other similar works, Endless Cabinet & Growing Jewelry Wall! ✨

If you really loved my work, you can always get me a coffee :)
(Commercial licences and high-quality renders also available on Ko-fi)