RIDEN 601 Digital Power Supply PAC Version

Meter: Compatible with RIDEN 601x series digital meters.

Power Supply: Uses a Huawei 'soap box' power supply, PAC2000S54-CE, with an input voltage of 220VAC to 54VDC and a power output of 2000W.

Switch: The top opening is for the power switch (this power supply has two of the shortest pins on the 16-pin tail plug; shorting these pins turns the power supply on, while disconnecting the short stops the power supply).

Power Compartment: The rear has reserved dual-port mounting holes that can use knurled nuts or heat-set nuts inserted and fixed with two screws. The model includes support rails with openings to accommodate heat-set nuts (2.8mm diameter) for securing the power supply's clamping screws; choose either of the two mounting methods.

Model Version: This version is tilted upward at 25° and is suitable for workstations where the desk is lower than shoulder height when seated. A 90° parallel model is also available for workstations higher than shoulder height when seated.