awollowa

cover

Back and Buttons

plate_1.png

Meshcore Logo Negative

plate_2.png

Debranded

plate_3.png

Multicolor

plate_4.png

back with heat insert

plate_5.png

2025-06-24_614cd81ae70b9.jpg

0.12mm layer, 3 walls, 15% infill

chanw11

IMG_4389.JPG

IMG_4390.JPG

IMG_4391.JPG

Modification pertains only to plate #1 (Back and buttons) Case was split into three individual parts, then the middle wall piece was scaled +5mm to accommodate a larger lipo such as the Maker Hawk 950mah Li-Po Small shim of paper or other material inside may be necessary to stop the battery from sliding around. A small lip remains near antenna side edge, just an FYI

+5mm extra large back for battery

Meshcore branded version of the amazing case made by @muziworks over on printables: https://www.printables.com/model/982046-h2t-case-for-heltec-t114-with-gps-running-meshtast

H2T - T114 - Meshcore Remix

ASIA

Print Profile(2)

Description

Comment & Rating (18)

License

Related Models