LEGOs Brick Logo Light Box

LEGOs Brick LED Light Box

A simple, blocky light box modelled to look like a classic LEGOs brick. This one’s shaped like a 2x4 stud brick and makes a fun addition to any desk, shelf, or display area—especially for LEG.O fans.

The LED channel is built into the rear section, and I’ve optimised the internal structure to make wiring straightforward. Just run your strip through the internal space and mount the light near the back panel for smooth, even glow.

I used Matte Red for the box body, to help prevent the light from shining through. Ensure you use Basic red for the front plate, however.

The rear box is 2mm thick for extra strength, and I’ve made the inside surface white to help reflect the light better. If you don’t want a multi-colour print, just select the rear plate in Bambu Studio, press N to go into painting mode, and hit “Erase All Painting.”

Details:

• Modelled after a classic 2x4 LEGOs brick
• Internal LED channel for easy lighting
• Stronger 2mm rear panel
• White inside surface for better light diffusion
• Prints well with both smooth and textured plates

Design Notes
All files are uploaded exactly as printed unless specified otherwise in project description (normally under a bold, red IMPORTANT). Some designs use different scaling (e.g. drinks lightbox series: front plate 90%, back plate 100%). If resizing, double-check your scale before printing.

All designs are created in Autodesk Fusion. Colours are separated in the Objects tab of Bambu Studio, so you can easily recolour if needed (e.g. single AMS setups).

Want to use this design commercially?
Please do not upload, share, resell, or remix this design without permission or claim it as your own.
These designs take time and care to create and I share them here for the community to enjoy. I’m always happy to take requests, just send me a message!

If you’d like to use my 370+ designs commercially, please join my Patreon:
https://patreon.com/The3DPrintSmiths