Pro Flow. InfinityFlow S1 Wall and Desk Mount
Print Profile(2)
Description
Howdy Snails! I wanted to save some money on my infinityflow s1 (found HERE ) and also make a duel purpose mounting solution… meet Pro Flow! The one stop solution for mounting your infinityflow on the wall or desk with a minimal footprint.
Additional Parts Needed:
-(6x) M3x6mm hex socket screws needed (amazon aff link HERE)
-(Optional to keep base from sliding on table) 6x2mm silicone bumpers (amazon aff link HERE) Note: Just squirting a dab of hot glue in each corner recess will do the same trick albeit not as cleanly or evenly.
Printing instructions: (see ready made profiles)
- Supports: None.
- .28 layer height
- 5 bottom layers, 5 top layers.
- 17 walls and 20% infill.
- Tested with a .4 mm nozzle. But .2 or .6 nozzles should be no problem.
Boost Me (for free)
I appreciate you!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (15)