Ninebot Max G30 Rear Fork Cover

Hey all!

This post is still under construction - I haven't yet added all the print profiles, but they are coming. THIS IS STILL A FUNCTIONAL PRINT! If you want to change the profile settings, give it a download!

I have here a rear fork cover made for the Ninebot Max G30 (it will also work on SNSC 2.0,2.1,2.2,2.3 rental models)

I found some other variants online, but wanted to make my own 
 This is my first functional model made with computer aided design software

There are two variants/plates. 
First plate: has small 3mm exit holes for the screws, so the screws kinda grab on to the plastic. I like it, because it keeps them in place when you remove the cover

Some may not want this! so: 

Second Plate: with 4mm screw holes so that the screws are easily removable from the fork cover when it is taken apart. 

The included profile includes 15% infill to save a bit of filament - if you want a stronger piece, download and edit the model, although I feel like this is already stronger than the stock rear fork cover from ninebot. 

Please let me know if you have any issues with this model
Enjoy