Pokemon - Mega Charizard X - Figurine - Dragon

Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support.

This is the first version. If there is interest in the model, I will divide it into parts and color it for multi-color printing.

Mega Charizard X  - This striking 3D model of Charizard Mega X brings the legendary Pokémon to life in an epic pose, with powerful wings outstretched and fierce energy radiating from its stance. With muscular limbs, detailed scales, and signature flame-tipped tail, this model captures the raw power and intimidation of Charizard's Mega Evolution X form.

Perfect for FDM printing, this figure was printed at 0.16 mm layer height, striking a great balance between smooth surface quality and print speed. The model is optimized for easy slicing and clean results, making it suitable even for mid-range FDM printers. The round base adds stability, making it ideal for painting, display, or use in tabletop games.

Whether you’re a seasoned 3D print enthusiast or a Pokémon collector, this piece is sure to stand out on any shelf or battle map.

“The flame on its tail burns hotter than blue steel—Charizard, let's Mega Evolve!”

Printed in PLA basic - Blue gray. Perfect for showing all the details and later painting.

If you prefer easier removal of supports. I recommend Desert Tan Matte PLA. Thanks to its porosity, it creates an ideal separation between the print and the supports, which makes it easier to remove them from the print.

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations: In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

•  

  Recommendations:

• 
   
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support

     Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

   

  Recommendations:

• 
   
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support