pianist

boost for free , don't let your boost expire , boost to help me get filament

the pianist 

a beautiful impresion of a lay pianist in a desinger dress made to replicate the keyboard of a piano,resulting in a spectaular image 

this will take some time to slice so be patient , follow the instructions below to achieve the colour changes and setting required 

project pianist 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150mm x 150mm  in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.32mm and the Actual Depth is 2.32mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA PolyLite Grey Transmission Distance: 1
    PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to Grey
    At layer #20 (1.68mm) swap to White for the rest.

if you can spare the time please rate , like or follow or just collect