Search models, users, collections, and posts
Monitor Stand II
Print Profile(4)
0.2mm layer, 2 walls, 15% infill
Designer
7.6 h
1 plate
0.16mm layer, 2 walls, 15% infill
Designer
9.5 h
1 plate
0.2mm layer, 2 walls, 15% infill (1.5 in. thick version)
Designer
10.7 h
1 plate
3 Part Version (For Easier Sizing)
Designer
3.9 h
1 plate
Open in Bambu Studio
Boost
26
68
2
1
54
16
Released
Description
// NOTE: When first printing, print a few layers as a draft to ensure it fits nicely. I recommend making it the same layer height as the full print you plan to print; tolerances will change depending on layer height.
- I recommend a 0.2 or 0.16 layer height or lower to ensure the board fits.
- The stand is meant for a 7.25 in. x 0.75 in. board.
They are 1 in. thick, and the thickness can be adjusted easily if needed.
- 4.51 in. tall in total.
- 3.50 in. tall underneath the board.
- 7.75 in. wide in total.
Boost Me (for free)
Please comment if you have any suggestions or improvements you would like to see.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (2)