WarGames Movie Poster - Hueforge Art - Free 3D Print Model

Search models, users, collections, and posts

Lumpy3D

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

X1 Carbon

P1P

X1E

H2D

P1S

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.08mm layer, 2 walls, 100% infill

Designer

2.1 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Description

Boost Me (for free)

Most of my Hueforges don't get a lot of downloads, so I make most of my points through boosts. I super appreciate any boost, It helps me continue making Hueforges. 😁 Thanks

Hueforges can be resized if you only change the X and Y scale, and leave the Z height the same.

Hueforge art of the movie “WarGames” (1983)

Project: WarGames (1983).hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x199.99mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #13 (1.12mm) swap to Yellow
    At layer #16 (1.36mm) swap to Jade White for the rest.

Collection getting to BIG?

Check out my Hueforge poster storage bin!

Join me on Patreon!

Comment & Rating (3)

@Tschonke

Print Profile

0.08mm layer, 2 walls, 100% infill

As a fan of the film, I always intended to create the cover as a Hueforge project. Upon seeing it by chance today, I simply had to hit print. The result is shown in the images—very cool. The print profile is nearly perfect. It would be 100% perfect if the frame were entirely black instead of the same colors as the layers. Yes, I know this usually generates a lot of waste. However, for users like me who also have an H2D at home, this wouldn't have been a problem and would have been a welcome option. Perhaps you could offer a second profile :)—otherwise, as I said… Excellent work and a superb print profile

Show original

@user_116648974

I am sure layer 25 has no more white on the picture apart from the frame, you could add another colour change to black to finish with a black frame.

(Edited)

@Tschonke

Replying to @user_116648974 :

All good – yes, I could have done that – but I wanted to print your profile to assess it. And nobody looks at it from the side anyway 😉

Show original

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.