Mini Spinning Top (Working!) - Free 3D Print Model

Search models, users, collections, and posts

Pi-Guy

Toys & Games>Other Toys & Games

IP Report

GIF

Print Profile(2)

All

A1 mini

P1P

H2D

P1S

X1E

X1 Carbon

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm nozzle (recommended) longer print time

Designer

20 min

1 plate

4.7(7)

0.4mm nozzle 2.5min print time

Designer

10 min

1 plate

4.5(19)

Open in Bambu Studio

Boost

208

396

592

293

Released

Bill of Materials

Bambu Filaments

Select all

PLA Basic

PLA Basic

Description

Download my newest model here! ;) https://makerworld.com/en/models/2555081

Say hello to the Mini Spinning Top — a bite-sized blast of spinning chaos! 🌀✨

Weighing in at just 0.33g and printing in a lightning-fast 2 minutes and 30 seconds, this tiny twister brings big spin energy. Whether you’re looking to fidget, show off your printer, or start a desk-top spin battle, it’s ready for action.

🛠️ Printing Tips:
• 🕒 Print time: ~2m30s. You may slow it down if the print quality is bad
• 👌 Print quality: Use flow calibration, no big deal if you can't

• 🧱 Supports: Just use the preset settings (tree)
• 🎨 Material: PLA recommended

It’s quick to print, super satisfying to spin, and weirdly addictive.
Give it a whirl! 🔄🔥

Boost Me (for free)

Did you love this top just as much as me? If so, boosting is the best way to show your appreciation. YOU ROCK! 😎

Membership

Want to sell this model? Simply subscribe to my license to sell all you want! 😊

Join

Membership

If you’d like to support me, consider joining my Support Tier Membership! For just $3 a month, you’ll be making a huge impact on my work. Your contributions help me keep creating, improving, and innovating! 😁

Join

No AI is used in this model. All of my models are made by me in Fusion 360.

Comment & Rating (52)

@Romans1x16

Pinned by Designer

Print Profile

0.4mm nozzle 2.5min print time

Umm, WHAT!!!! 😱 This tiny little print is mind-blowing. Also way to much fun!! 🤩 It spins incredibly well and incredibly long for what it is. It can be spinning on a table top and fall onto the floor and still be spinning. 😦 It's crazy that it only takes 0.33g and 10 minutes to print. I don't know why you're still reading this review, go print it! 😄 15/10 Actually go print this right now (Printed in Bambu Lab Blue Hawaii PLA Silk Multi Color)

The profile uploader has replied

@Pi_Guy

Thank you so much! 😂

(Edited)

@Romans1x16

Replying to @Pi_Guy :

Anytime! 😄

(Edited)

@Caleb_Wride

Boosted

Just a suggestion. I would recommend adding a 0.2mm nozzle profile. This print is soooooo small that it could benefit from being printed in a small nozzle size.

The designer has replied

@Pi_Guy

Okay I added one! Thanks for the recommendation and boost! And yeah, it’s a big difference between 0.4 and 0.2!

@Caleb_Wride

Boosted

Replying to @Pi_Guy :

Haha, it looks like it was injection molded!

@Pi_Guy

Replying to @Caleb_Wride :

IK! 😂

@Jinooo

Print Profile

0.2mm nozzle (recommended) longer print time

impressively good

The profile uploader has replied

@Pi_Guy

Thanks for the review! :)

@SpagEddie

Print Profile

0.4mm nozzle 2.5min print time

fun to play with! thanks!

The profile uploader has replied

@Pi_Guy

Your welcome! 😁

@user_3770285048

Print Profile

0.2mm nozzle (recommended) longer print time

bad print … might’ve been the printer… try again later

(Edited)

@Sam360

Print Profile

0.2mm nozzle (recommended) longer print time

A great way to test out a new nozzle

@3DZINER

Print Profile

0.4mm nozzle 2.5min print time

Pretty cool being that small, and it printed great, but it won't spin for longer than 10 seconds.

The profile uploader has replied

@Pi_Guy

Yeah, less size, less inertia. If you want one that spins for a LONG time, I have a bigger model that spins for over 5 minutes! https://makerworld.com/en/models/1233139-spinfinity-a-very-long-spinning-top#profileId-1252198

(Edited)

@3DZINER

Replying to @Pi_Guy :

Cool! I'll probably try that one out. I guess I just thought this one would spin a little longer based on the description, but it is cool that it can even spin at that size.

(Edited)

@3DZINER

Replying to @Pi_Guy :

Just a thought, but if you designed another version of this tiny top that you could spin with a special tool or something, rather than by hand, it would spin a bit longer. I think big fingers spinning that little top take away a lot of the energy from the spin.

@Jessie555

It took ten minutes to print.

@user_3920300454

That’s because your printer has to calibrate before it actually prints the model. That’s what the extra time after the 2.5 minutes is for.

@Jessie555

(Edited)

@user_1589125162

it's 10 and 20 minutes not 2.5

The designer has replied

@Pi_Guy

That's counting prepare time, actual printing time is 2.5.

@mudwonk

Print Profile

0.4mm nozzle 2.5min print time

once I saw @Roman1x16 rating and I was convinced that I needed to try it. my friend thought that I was weird because I was having such a great time with a tiny top.

The profile uploader has replied

@Pi_Guy

Nice!! :D

@user_843128360

hello are you still wanting me to test print the injection mold or not?

The designer has replied

@Pi_Guy

I will just post it as a beta version on MakerWorld. I don’t know when.

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.