MatuKing

cover

Spool-04.jpg

Spool-01.jpg

Spool-03.jpg

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

🎯 Adaptador para Centrado y Giro del Soporte de Bobina – Ideal para Extrusión Directa&nbsp;¿Tenés un sistema de extrusión directa y el filamento no fluye de forma ideal? Este adaptador fue diseñado para reposicionar el soporte de bobina, centrándolo y girándolo hacia el extrusor, lo que permite una alimentación más suave y sin restricciones.&nbsp;🔧 Características destacadas:&nbsp;Mejora la alimentación del filamento, reduciendo tirones y posibles atascos.&nbsp;Permite orientar la bobina de forma óptima para sistemas direct drive.&nbsp;Apto para impresoras con barra horizontal superior de 20×20 mm (perfil 2020).&nbsp;Fácil instalación: solo necesitás 4 tornillos M4 y 4 tuercas tipo martillo (T-nut) para perfiles V-Slot, como los de la imagen.&nbsp;🖨️ Recomendaciones de impresión:&nbsp;Material sugerido: PETG o ABS (para mayor resistencia).&nbsp;Relleno: mínimo 25%.&nbsp;No requiere soportes si se imprime en la orientación adecuada.&nbsp;💡 Ideal para mods en impresoras como la CR-10, Ender-3, Artillery, etc. con extrusión directa y perfiles 2020.&nbsp;¡Probalo y optimizá tu setup de filamento en segundos!&nbsp;-----------------------------------------------------------------------------------------------------------------------------&nbsp;🎯 Spool Holder Centering and Rotating Adapter – Ideal for Direct Extrusion&nbsp;Do you have a direct extrusion system and the filament isn&#39;t flowing optimally? This adapter was designed to reposition the spool holder, centering it and rotating it toward the extruder, allowing for smoother, unrestricted feeding.&nbsp;🔧 Highlighted Features:&nbsp;Improves filament feeding, reducing pulling and potential jams.&nbsp;Allows for optimal spool orientation for direct drive systems.&nbsp;Suitable for printers with a 20x20mm top horizontal bar (2020 profile).&nbsp;Easy installation: you only need 4 M4 screws and 4 hammer-type nuts (T-nuts) for V-Slot profiles, like the ones pictured.&nbsp;🖨️ Printing Recommendations:&nbsp;Suggested material: PETG or ABS (for greater strength).&nbsp;Infill: Minimum 25%.&nbsp;No supports required if printed in the proper orientation.&nbsp;💡 Ideal for mods on printers like the CR-10, Ender-3, Artillery, etc. with direct extrusion and 2020 profiles.&nbsp;Try it and optimize your filament setup in seconds!

🎯 Spool Holder Centering and Rotating Adapter – Ideal for Direct Extrusion&nbsp;Do you have a direct extrusion system and the filament isn't flowing optimally? This adapter was designed to reposition the spool holder, centering it and rotating it toward the extruder, allowing for smoother, unrestricted feeding.&nbsp;🔧 Highlighted Features:&nbsp;Improves filament feeding, reducing pulling and potential jams.&nbsp;Allows for optimal spool orientation for direct drive systems.&nbsp;Suitable for printers with a 20x20mm top horizontal bar (2020 profile).&nbsp;Easy installation: you only need 4 M4 screws and 4 hammer-type nuts (T-nuts) for V-Slot profiles, like the ones pictured.&nbsp;🖨️ Printing Recommendations:&nbsp;Suggested material: PETG or ABS (for greater strength).&nbsp;Infill: Minimum 25%.&nbsp;No supports required if printed in the proper orientation.&nbsp;💡 Ideal for mods on printers like the CR-10, Ender-3, Artillery, etc. with direct extrusion and 2020 profiles.&nbsp;Try it and optimize your filament setup in seconds!

Print Profile(0)

Description

Comment & Rating (0)

License

Related Models