FLEXI CONNECTOR

FLEXI CONNECTORS

Three simple and practical flexi connectors, each weighing less than 0.5 grams.

Print time with 100% infill: 9 minutes.

Completely reversible, they can be scaled to join pieces of all sizes.

With these connectors, you can join two or more objects of your choice, making them flexible.

Along with the "FLEXI CONNECTOR" file, you will find the "NEGATIVE PART" file, which you will need to join your pieces.

With the FLEXI CONNECTOR, you can connect your objects permanently (it's easier to break than to disassemble).

With the FLEXI CONNECTOR MAGNETIC, you can connect them temporarily; four 5 x 2 mm magnets are required for each connection.

With the FLEXI CONNECTOR BOTTON, you can sew your pieces together like a regular button, providing a solid yet removable connection.

PROCEDURE:
1: Place the two or more objects you wish to flexibly join on the print bed and position them at the chosen distance (minimum 2 mm).
2: Select the two or more objects and right-click "merge".
3: To import the file (NEGATIVE PART), right-click on the merged objects, select "add negative part", and click "upload".
4: Position the negative part on the "-0.1" of the Z-axis of the print bed or on the upper face of the objects you wish to join, as shown in the example file.

You will also notice that inserting it more or less deeply will increase or decrease the gap between the two pieces to be joined.
Completely reversible, it fits perfectly into its negative part from all sides and in every direction.

To see a project I've already created using this fantastic connector, visit my page and view the "FLEXI BIRD CONNECTED" project.

CLICK TO VISIT MY PAGE: Ciri Artlab FOR MANY OTHER AMAZING MODELS

https://makerworld.com/@Cirillo/upload

CLICK TO VISIT MY PAGE: Ciri 3dlab FOR MANY OTHER AMAZING MODELS

https://makerworld.com/@ciri_3dlab/upload