user_696196629

looks cool but I sure hope you all are not putting anything hot in this its made uot of plastic

amazing amazing Print you have to play around for the cover to go in first has to get broken in but otherwise it's very very good print five star to the max I'm not sure what other reviews saying that's tow  star but I say five

user_3364743104

0.2mm layer, 2 walls, 15% infill

TheMadMike23

Jesus is Lord

sheff55

HORACIO MONZON

Darkangel3323

cover

Druck.JPG

IMG_9010.jpg

IMG_9011.jpg

IMG_9012.jpg

IMG_9013.jpg

IMG_9014.jpg

plate_1.png

plate_2.png

plate_3.png

plate_4.png

Druck Bambu.JPG

Deutsche Version:Ein Thermobecher mit Schraubgewinde und Verschluss. Ich empfehle euch für den Druck das Filament von Polymaker HT-PLA dieses ist bis 150C° temperaturstabil und istLebensmittelecht wie auch Spulmaschinen geeignet. Muss dazu sagen das der Becher nicht 100% dicht ist aber es läuft auch nicht gleich alles aus, ist auch abhängig wie gut euer Drucker es gedruckt bekommt.Ein bisschen nacharbeiten am Gewinde wie auch an den Kanten ist nicht zu vermeiden.Der Ring ist aus TPU und wird in die Aussparung unten in den Becher geklebt. Dieser ist nur Optional und nicht zwingend erforderlich.Viel Spaß damit.&nbsp;English Version:A thermos flask with a screw thread and cap. I recommend using Polymaker HT-PLA filament for printing; it&#39;s temperature-stable up to 150°C and is food-safe and suitable for spooling machines. I should point out that the flask isn&#39;t 100% leak-proof, but it won&#39;t leak out immediately. It also depends on how well your printer prints it.A little reworking of the thread and edges is unavoidable.The ring is made of TPU and is glued into the recess at the bottom of the cup. This is optional and not required.Have fun with it.

German Version:An insulated mug with a screw thread and lid. For printing, I recommend Polymaker HT-PLA filament; it remains stable up to 150°C and is food-safe and dishwasher-safe. It's important to note that the mug isn't 100% leakproof, but it won't immediately spill everything; this depends on how well your printer produces it.Some post-processing of the thread and edges is unavoidable.The ring is made of TPU and is glued into the recess at the bottom of the mug. This is optional and not strictly necessary.Enjoy! English Version:An insulated mug with a screw thread and lid. I recommend using Polymaker HT-PLA filament for printing; it's temperature-stable up to 150°C and is food-safe and dishwasher-safe. I should point out that the mug isn't 100% leak-proof, but it won't leak immediately. It also depends on how well your printer prints it.A little reworking of the thread and edges is unavoidable.The ring is made of TPU and is glued into the recess at the bottom of the cup. This is optional and not required.Have fun with it.

Insulated Mug / Thermos mug

ASIA

Print Profile(1)

Description

Comment & Rating (7)

License

Related Models