Gardena tub/ container/ swimming pool filler hook
Print Profile(5)
Bill of Materials
Description
Boost Me (for free)
Feel free to boost me!
A simple solution to fill tubs without holding the house or the chance that your hose will jump out of the tub. the Model is designed to print with minimal supports (only support for the gardena coupler is necessary for a good fit).
The large diameter of the inner tube vs the intake coupler size is to reduce the pressure and results in a tools that stays in place while filling your tub.
In the second Print profile you will find additional sizes: 70mm, 100mm, 150mm and the original→ 50mm
If you rather connect your hose with hose clamps and a barbed nozzle you can use my 1/2 inch hook over here: Barbed nozzle tub hook
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (424)