Leupold D-EVO and LCO Red Dot sight 6x sight

Please be sure to comply with your local laws and do not use the model for inappropriate purposes.This is a cosplay prop.

Due to the new regulations, I cannot provide the complete model here. I will share the complete model on a cloud drive. After downloading the .3mf file here, you will receive the password, and you will have the complete toy.

Please do not open the downloaded .ZIP file directly with Windows Explorer, as it cannot be opened with a password. Please use unzip software such as 7-zip to open it.

Due to some comments in the comments section, I will no longer reply to any comments from now on!If you can understand the introduction, you will be able to obtain the complete model. If you cannot obtain the model, I will not provide any further explanation.

The Leupold D-EVO is a simple yet clever device: a 6x sight that mounts on the rail of your rifle, behind a reflex red dot sight like the Leupold LCO (but any other red dot sight will work, as long as it clears the D-EVO).

What’s peculiar is that the Leupold D-EVO doesn’t work in direct line of sight, but it’s like a sideways periscope. A double set of prisms inside the device rebound light so that the front lens and eyepiece are offset to look “around” the RDS.

The eyepiece itself is peculiar as it is not circular, but flattened on the top portion so that, when seen from the shooting position, the Leupold LCO and the Leupold D-EVO sight pictures complete each other.

It only has appearance, but no function

 

 

 

Please be sure to comply with your local laws and do not use the model for inappropriate purposes.

Under the new reward mechanism, please "Boost Me" more, give me five-star praise, and welcome everyone to share and show off their finished works, so that I can get more points. Your support is my biggest motivation to continue designing more models.

Reminder:

• Different filaments may cause the parts to be too loose or too tight, and may also make some supports difficult to remove.
• The position of the model printing takes into account strength and appearance (for example: vertical surfaces have better fineness and better representation of patterns and text; horizontal printing axes sacrifice accuracy but have better strength).
• Please keep the printing plate clean. All models are confirmed to be printable. It's not my fault if it turns into spaghetti.
• It is recommended that you equip yourself with a heat gun. Slightly heating the parts can solve many minor problems and can also compensate for minor part tolerances.