2Pac Hueforge (AMS required)
Print Profile(1)
Description
Boost Me (for free)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x133.83mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.15997mm
Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#6f5034 PLA BambuLab Basic Cocoa Brown Transmission Distance: 0.4
#ae835b PLA BambuLab Matte Caramel Transmission Distance: 1.5
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Cocoa Brown
At layer #13 (1.12mm) swap to Caramel
At layer #17 (1.44mm) swap to Ivory White for the rest.
Of course you can always use your own shades of the various colors and give it you own unique touch
Boost Me (for free)
If you enjoyed printing this model, please consider leaving a **like or a boost** to show your support! Your feedback and support goes a long way and helps others discover models you’ve enjoyed too. Thank you for stopping by.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)