Josemari

cover

stand1_d3a0b35a-6e20-48e2-9003-c963a23fe220.jpg

stand5_356bce80-d5b4-4986-94f9-8b16a6b78c6f.jpeg

WhatsApp-Image-2022-06-15-at-7.13.26-PM_ebe2c451-d023-400d-97a6-9705ff856130.jpeg

plate_1.png

fold_87814585-6573-4e99-b575-502143c66f95.webp

plate_1.webp

Deactivate supports to print it properly

0.2mm layer, 2 walls, 15% infill

SyntaxError6

41DF238E-3259-4763-B15B-F4FFF900F3A4_05e42c27-d031-46c3-bfdf-f3cf263b7a6e.webp

Added minimal supports using the support paint tool.  There was some concern/feedback in the comments that it was needed for the P1P/P1S. Most of the print doesn't need it but there are some overhangs that need to be clean around the pivot point.

0.16mm layer, 4 walls, 20% infill

Spetz3D

tempImageVWrv6Y.jpg

tempImagekqteJX.jpg

Printed the stand with PETG.Used 0.24 layer height for faster print, its comes out perfect.Used 10% infill for faster print and it was enough.The slicer want support for the small overhangs but i print it without with no problem.&nbsp;I hope you will be happy with it!&nbsp;If you want to support me please rate this profile and check my page for more designs! &nbsp;<a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/@Spetz3D">https://makerworld.com/en/@Spetz3D</a>&nbsp;Happy printing! :)

PETG, 0.24mm layer, 2 walls, 10% infill

Lisana Studio

IMG_0293_81d4fe5e-f461-4b8a-bc04-34b3b076f68b.webp

IMG_0294_d57763b5-51be-410c-8aef-5258321565fa.webp

IMG_0295_50e74b00-5ce5-4020-8fcc-d4ed7c1fbc86.webp

This model is printable on an A1 mini and is currently utilized for my 13" laptop. For safety measures, it has been printed with supports, although this is unnecessary given the smaller size of the model.&nbsp;Filament used: Matte black PLA.&nbsp;Ps. the size on the A1 mini reached the limit for this model ;-) but I am glad that it suites my 13" laptop very well.

0.2mm layer, 2 walls, 10% infill, A1 mini

Beppe

IMG_6467.jpeg

Excellent results even with 0.6 nozzle to reduce printing time. Just some minor issues on unlocking the folding.

A1 0.6mm nozzle, 0.3mm layer, 2 walls, 15% infill

Octa815

IMG_3286.jpeg

IMG_3289.jpeg

IMG_3288.jpeg

IMG_3287.jpeg

Impreso con Recreus Filaflex TPU 90a (Mismo perfil que Bambu Lab TPU 90a)

Printed with Recreus Filaflex TPU 90a (Same profile as Bambu Lab TPU 90a)

TPU Anti-slip Pads

A simple foldable laptop stand designed to be printed without supports.&nbsp;Highly recommended installing 4 anti-slip pad in the base. There are four joggles in the design for this purpose. I have them installed in mine (If you see the gif you can notice these pads) and works really great in my office desk&nbsp;

Foldable laptop stand 

ASIA

Print Profile(6)

Description

Comment & Rating (987)

License

Related Models