Fan and cleaning nozzle for Tycoon Slim

I created this adapter for a 5015 fan to be used on the Kywood Tycoon Slim, and it worked wonderfully. I severed the wires from the old fan and connected them using a Wago connector. In the spirit of improvement, I also fashioned a cleaning tool using silicone provided with my Bambu Lab A1. To assist fellow owners of this printer, I'm sharing the G-code for use on the right side, as shown in the image I've included:

This G-code is exclusively for the Kywood Tycoon Slim model. Attempting to use it on another printer will result in damage!

G92 E0 ; Reset extruder

; Initial heating
M140 S[bed_temperature_initial_layer_single]  ; Initiate bed heating (without waiting)
M104 S180 ; Heat nozzle to 220°C temporarily (without waiting)

; Homing
G1 Z15 F3000 ; Raise Z-axis before homing
G28 X Y F2000 ; Rapid homing on X and Y axes
G28 Z F2000 ; Z-axis homing

; Leveling
G29 F1500

G1 Z3.0 F3000 ; Raise Z slightly after leveling
M104 S[first_layer_temperature] ; Set final nozzle temperature (without waiting)
M190 S[bed_temperature_initial_layer_single] ; Wait for bed to reach temperature
M109 S[first_layer_temperature] ; Wait for nozzle to reach temperature

; ===== Quick side nozzle cleaning before printing =====

M211 S0   ; Disable soft endstops to allow for out-of-print area movement (exercise caution when modifying this section of the G-code; it disables printer limits on all sides!!)

G1 Z0.28 F1200         ; Approach the nozzle to the bed
M106 S255
G1 E -0.15 ;Retract filament
G1 X240.5 Y35 F6000 ; Initiate horizontal side cleaning
G1 X247 Y35 F3000
G1 X240.5 Y35 F3000
G1 X240.5 Y30 F3000
G1 X247 Y30 F3000
G1 X240,5 Y30 F3000
G1 X240,5 Y25 F3000
G1 X247 Y25 F3000
G1 X240,5 Y25 F3000
G1 X240,5 Y20 F3000
G1 X247 Y20 F3000
G1 X240,5 Y20 F3000
G1 X240,5 Y15 F3000
G1 X247 Y15 F3000
G1 X240,5 Y15 F3000
G1 X240,5 Y10 F3000
G1 X247 Y10 F3000
G1 X240,5 Y10 F3000
G1 X240,5 Y5 F3000
G1 X247 Y5 F3000
G1 X240,5 Y5 F3000
-----
G1 X240.5 Y32 F6000 ; Initiate vertical cleaning
G1 X246.5 Y32 F3000
G1 Y0 F5000           ; Descend while cleaning
G1 Y32 F5000          ; Ascend while cleaning
G1 Y0 F5000           ; Descend while cleaning
G1 Y32 F5000          ; Ascend while cleaning
G1 Y0 F5000           ; Descend while cleaning
G1 Y32 F5000          ; Ascend while cleaning
G1 Y0 F5000           ; Descend while cleaning
G1 Y32 F5000          ; Ascend while cleaning
G1 Z5 F1200           ; Raise the nozzle
M106 S0
M211 S1               ; Reactivate soft endstops (exercise caution when modifying this section of the G-code; it disables printer limits on all sides!!)

G92 E0 ; Reset extruder for a clean start
G1 Y75 X232 Z0.2 F2500 ; Move to purge line position
G1 Y25 X232 Z0.2 F2500 E30 ; Draw 1st line
G1 Y75 X230 Z0.2 F2500 E30 ; Draw 2nd line
G92 E0 ; Reset extruder

This G-code is exclusively for the Kywood Tycoon Slim model. Attempting to use it on another printer will result in damage!