Search models, users, collections, and posts
Bacterio: Print in place T4 Bacteriophage
IP Report
Print Profile(1)
Batteriofago 0.08mm layer, 2 walls, 15% infill
1.5 h
1 plate
Open in Bambu Studio
Boost
31
66
7
2
104
34
Released
Description
5% to 10% infill
0.1 to 0.2 mm layer height
Some tips:
For more force in poses try skirt 2-3 outlines (2-3 layers).
Too Stiff joints: Negative horizontal expansion is recommended (-0.01 ; -0.02) or more.
Too Loose joints: Positive horizontal expansion is recommended (+0.01 ; +0.02) or more.
It depends on your configuration, printer and filament.
XY compensation and horizontal expansion are the same, more or less.
Follow images instructions before open the hinge for better performance.
Shoutout Mi Réplica 3D for the model!
License
This user content is licensed under a
Creative Commons Public Domain
Comment & Rating (7)