Expedition 33, Pop / Chibi Maelle Baguette skin

Les amis !!

It's my first try as a Pop figurine, I obviously did our favorite Maelle in Baguette style.

 It was printed at 0.12mm layer height, though I recommend going lower if your printer supports it — you'll get sharper detail and an easier cleanup process.

I opted for plain supports, which helped with overhangs but made the cleanup more challenging. Be prepared to spend some extra time post-processing — it’s not the easiest print, but it's worth the effort.

Painting was a collaborative project between me and my son. We're beginners, so the paint job is rough around the edges — but the fun was in doing it together! If you print and paint it yourself, just enjoy the process and don’t stress about perfection.

Notes & Tips:

• Based on Maelle from Expedition 33
• Use lower layer heights for better results
• Consider using custom/tree supports for easier cleanup
• Not recommended as a beginner print due to cleanup complexity

ps : orange model has been done 0.2 with tree support and is way easier