Spider-Man Anti-Ock Helmet
Print Profile(1)
Bill of Materials
Description
Spider-Man Anti-Ock Helmet
Update - 6/21/25
The back of this bothered me so much I decided to redo it.
This was to allow more space so it doesn't scrap ageist the head when putting it on, and taking off of the helmet.
Update - 6/22/25
A bit of confusion was caused by myself. When I said I updated the (Back) I should have mentioned the hole model was recut.
I just assumed people understand that somehow, And that was stupid of me.
So to clarify if you printed the old version you will have to reprint the entire model if you want the better fit current version.
Very Sorry for any trouble this may have caused.
Sized to fit my number 3 sizing head found here - https://makerworld.com/en/models/52526
Included two lens types. They both have visibility, Just one more then the other of course.
The Lens use snap fit design. - No glue needed.
Uses 8x2mm Magnets, - Be sure to use the magnets in the BOM as they were tested and work properly.
Magnets in total for the build - 8x2mm =26 in total
Use Super Glue "I use the gel kind" when inserting the Magnets.
This is still 100% necessary or the magnet will come out.
Enjoy
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (80)