rangido

cover

_1099440.JPG

plate_1.png

_1099438.JPG

It prints both parts on one plate and in 2 different colors. There is only need for 1 single color change since they are printed by object. This can be more convenient than having 2 different plates, since only 1 single print has to be done. 0.2mm layer, 2 walls, 15% infill

1 plate, 0.2mm layer, 2 walls, 15% infill

plate_2.png

2025-06-20_f64ebf63cad84.jpg

2 plates, 0.2mm layer, 2 walls, 15% infill

3 D'Agostino creations

20260109_072728[1].jpg

20260109_072736[1].jpg

optimized for minimal waste

3D Prince

690732506_1434788288419114_6696836197150816618_n_mTA37.jpg

694146736_1271878471299310_5347425067705346908_n.jpg

690732506_1434788288419114_6696836197150816618_n.jpg

691741222_1463806218857098_3322083861595456839_n.jpg

100% Scale. Choose your Colors! Layers Carefully Tuned for Minimizing Time &amp; Material Waste. you can choose your colors, and even use the same color if you want with Bambu Handy app. many many substantial value adding adjustments also that result in low filament material waist and quick print time with reasonably good strength…&nbsp;see the specifics below…  height range mods to control wall width and heat. 0.20mm layer, 1 walls, 0.8mm, 0.6mm, 0.52mm, &amp; 0.42mm wall width, 0% infill, wall generator classic, detect over hang walls off, detect narrow internal solid infill off, ensure vertical shell thickness disabled, acceleration speed [ short travel , initial layer travel, initial layer, outer wall, top surface ] all turned up to 10000mms. max volumetric speed for PLA, and PETG both set to 30mm3/s, cooling for over hangs set to 100%, minimum fan for layers less than 4 seconds 100% and for the other layer times 100% and auxiliary part cooling fan 70%.&nbsp;note that filament flow, and cooling settings will likely revert to default and acceleration speed will also likely revert to default if you use a different Bambu printer.&nbsp;

Layers Carefully Tuned for Minimizing Time & Material Waste.

Almenning2

20260528_205237.jpg

Color per object, increase quality / silk optimized

JaMz_3D_Prints

20260412_110959.jpg

20260412_111017.jpg

20260412_110825.jpg

0.2mm layer heightNo supports usedColorized with red and whiteExtremely strongCompatible with any printer

0.2mm layer, 3 walls, 10% infill

Ameisenfan

signal-2026-07-15-15-35-22-536_003.jpg

signal-2026-07-15-15-35-22-536_002.jpg

signal-2026-07-15-15-35-22-536.jpg

Viel Spaß mit dem Druck.Ich freue mich wenn sie es Bewerten.

Have fun with the print.I'd appreciate it if you rated it.

Wide printer selection (AMS)

I saw some of the popular spiral passthrough fidget toys and got inspired to recreate one as a learning experience. This model is my take on the spiral fidget cone, and I think it actually turned out really well! The model is 8.5cm or about 3.3 inches tall.<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you like my work, give it a boost! Thank you for your support!</boostcontent></boostme>This 3D model is licensed under the Creative Commons Attribution (CC-BY) license.  You are free to use, share, modify, and even sell this model, as long as proper credit is given to me, the original creator of this model.

Spiral Cone Fidget

Dekecon

Cone Passthrough 2.png

Cone Passthrough 3.png

Spiral Fidget Cone

PXL_20240922_001953258.MP.jpg

PXL_20240922_002000871.MP.jpg

PXL_20240922_224536621.MP.jpg

PXL_20240922_224602084.MP.jpg

PXL_20240922_224623143.MP.jpg

Spiral Fidget Double Helix

ASIA

Print Profile(7)

Description

Comment & Rating (2282)

License

Remixes (31)

Related Models