Helena

cover

1.png

2.png

plate_1.png

plate_2.png

2025-06-20_cde94d5b53c7f.gif

0.2mm layer, 2 walls, 15% infill

Volfera

PXL_20250625_071833269.PORTRAIT.ORIGINAL.jpg

Sans titre.png

0.16mm, Print by objet (only 1 filament change) to use only one plate, reduced speed for quality overhangs, enabled and enlarged brim only for the ball

[ONE PLATE] Optimized Print by Object, 0.16mm 

3D Prince

6aa0f33d-bcce-4222-a4ef-679805e2e949.jpg

8e4f08a6-7779-4a31-8276-c1c3571fbbaa.jpg

9e40d7d7-80d2-4f79-826b-2a0cacf6719f.jpg

903620e0-d073-461e-9493-de0e17bbf398.jpg

7c57dfaf-07c6-4b3e-8b18-533f579c0959.jpg

f8d60459-749f-4a74-b1ff-cfc22a294006.jpg

73855388-5f24-4039-abf4-45fb7fe5a588.jpg

35ae4997-8052-4a7d-97d5-87962b1177f7.jpg

24ffa24a-7b17-4a41-91d1-350655bff69a.jpg

Carefully Tuned to Minimize Material Waist &amp; Smooth Operationmany many substantial value adding adjustments also that result in low filament material waist and quick print time with reasonably good strength…&nbsp;see the specifics below…&nbsp;0.20mm layer, 1 walls, 0.6mm wall width, 0% infill, wall generator arachne, detect over hang walls off, detect narrow internal solid infill off, ensure vertical shell thickness disabled, x-y contour compensation -0.20, acceleration speed [ short travel , initial layer travel, initial layer, outer wall, top surface ] all turned up to 10000mms. max volumetric speed for PLA, and PETG both set to 30mm3/s, cooling for over hangs set to 100%, minimum fan for layers less than 4 seconds 100% and for the other layer times 100% and auxiliary part cooling fan 70%. note that filament flow, and cooling settings will likely revert to default and acceleration speed will also likely revert to default if you use a different Bambu printer.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;0.2mm layer, 1 walls, 0% infill

Carefully Tuned 2 Minimize Material Waist & Smooth Operation

Theprintmaster

Screenshot 2026-06-12 at 1.24.03 PM.png

0.2mm layer, 2 walls, 15% infill Smaller/Faster

wessszzzzzz

Photo on 7-7-26 at 8.40 PM.jpg

0.2mm layer, 2 walls, 10% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

A visually striking fidget toy featuring a spinning white core encased in a black vortex shell. Twist and spin the internal ball for a satisfying tactile experience. Ideal for stress relief, desk play, or as a mechanical conversation piece.<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Thank you!</boostcontent></boostme>

Vortex Ball Fidget – Spinning Core Twist Toy

ASIA

Print Profile(5)

Description

Comment & Rating (1344)

License

Related Models