M4rt11n

cover

0fff7315-f084-41a9-a2a6-d230899cd57e.jpg

cb99eabe-0f1d-4c6a-8f40-70a3a15e60fa.jpg

stažený soubor (2).jpg

stažený soubor (1).jpg

stažený soubor.jpg

Top Piece (Small)

plate_1.png

Top Piece (Large)

plate_2.png

Connecting Piece (Small)

plate_3.png

Bottom Piece (Small)

plate_4.png

Full Wall Section

plate_5.png

Corner Piece (Upper)

plate_6.png

Corner Piece (Bottom)

plate_7.png

Connecting Piece (Large) 

plate_8.png

Bottom Small (Large)

plate_9.png

Air conditioning input

plate_10.png

Jack

IMG_0054_preview.jpeg

I had issues using the connector pieces and due to the wind it would need to withstand I ended up soldering it together each part (not recommended). &nbsp;I attempted to print on an A1 Mini however most plates are too big to print.&nbsp;Whilst possible to print on an A1 - I would recommend using a SuperTack Plate for all instead of just the one recommended.&nbsp;For an installation like mine you will need;Two of each (one for top &amp; bottom)<ul><li>Top Piece (Small)</li><li>Bottom Small (Large)</li><li>Bottom Piece (Small)</li><li>Corner Piece (Bottom) [RECOMMENDED: PRINT ON A SUPERTACK PLATE]</li></ul>You will need one of these:<ul><li>Air conditioning input</li></ul>And depending on the height of your window a mix of: <ul><li>Full Wall Section</li></ul>&nbsp;Do as I say, Not as I do.

Each Printable Item Per Plate

FazZy

photo_2026-06-26_18-45-47.jpg

image_2026-06-23_012743447.png

1000109964.jpg

I fixed wall connections, so y can asembly them all together and I put settings i used for print (Ironing is not necessary) I used PETG basic&nbsp;

Fixed walls and optimized

This version has had all plates condensed down to just four printable plates&nbsp;I had issues using the connector pieces and due to the wind it would need to withstand I ended up soldering it together each part (not recommended). &nbsp;I attempted to print on an A1 Mini however most plates are too big to print.&nbsp;Whilst possible to print on an A1 - I would recommend using a SuperTack Plate for all instead of just the one recommended.&nbsp;For an installation like mine you will need;Two of each (one for top &amp; bottom)<ul><li>Top Piece (Small)</li><li>Bottom Small (Large)</li><li>Bottom Piece (Small)</li><li>Corner Piece (Bottom) [RECOMMENDED: PRINT ON A SUPERTACK PLATE]</li></ul>You will need one of these:<ul><li>Air conditioning input</li></ul>And depending on the height of your window a mix of: <ul><li>Full Wall Section</li></ul>&nbsp;Do as I say, Not as I do.

Optimised Space Edition

FuzzyFelt

tempImage6r5FLv.jpg

A1 - A1: This profile adds a brim around the print on the build plate. This improves first-layer adhesion and reduces the chance of the model lifting or moving during printing for the two corner pieces.

0.2mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

This is a hot air outlet adapter designed for portable air conditioners. It helps direct hot air exhaust to the window, improving the efficiency of the air conditioner. Easy to print and install, suitable for various air conditioners&nbsp;Dimensions&nbsp;height    143 CM&nbsp;length    54 CM&nbsp;&nbsp;&nbsp;

air conditioning warm air outlet

ASIA

Print Profile(4)

Description

Comment & Rating (29)

License

Related Models