Universal head stand for GSC and BJD headshells, 3-12 part split version, size adjustable!

DIY BJD head stand! I recently wanted to make BJD wigs, but couldn't find suitable head stand files, so I made one myself~!

The pictures show my own 3/8 head and GSC Kagamine Rin headshell; the face shell is from Xiong Mao Mao! You can refer to the effect in the pictures~

The cylindrical tube can be extended; please adjust it to the appropriate length yourself [Scale height after clicking on the cylindrical tube]

Enlarge the base by 0.5% when printing for faster insertion and removal of the cylindrical tube~

Instructions for use:

The cylindrical tube connects to the base below at the notched section. Pass the rubber band through the square hole at the top of the cylindrical tube and into the tube. Pull the rubber band out of the notch, through the square hole in the base, through the square hole on the outside of the base, and tie a knot to secure it! Remember to pull the rubber band tight for a better effect~ [Secured with cotton swabs in the picture below; this works for me, so I won't change it!]

For makeup or wig making, you can use eye mud [blue tack], traceless nano glue, nail gel, etc., for fixing. Larger heads require more fixing; currently, four pieces of eye mud can secure a 3/8 head.

Self-taught modeling! I may share more headshell files in the future~

The face shells and headshells are all self-printed ww, if you like it, please leave me a message and follow, you can share parameters! Welcome to play with me~ Same name on XHS~!