【Koenigsegg】Koenigsegg Jesko Road Car Supercar Racing Car Assembly/Movable Tires

【Special Notes for F1 Models】

1. The author has conducted structural printing tests on all models before release. However, the F1 model has a complex structure and requires high printing precision. Newcomers are advised to use the parameters in the slicer directly for printing and not to adjust them arbitrarily to avoid printing failures; experienced players may ignore this reminder.
2. The printing effect of the model is affected by various objective factors such as equipment, filament, and environment. If you encounter problems during printing, you are welcome to contact me through comments or private messages, and I will assist in troubleshooting. Creating is not easy. Please communicate before evaluating and do not give low scores at will; malicious negative reviews will result in being blocked. Thank you for your understanding!
3. All models from the author are tested based on Bambu Lab printers, and the configuration files use Bambu Lab's official slicing software. If you are using other brands of printers, it is recommended to adjust the parameters according to your own equipment's slicing software and preview before printing. Thank you for your cooperation!

4. As multi-color printing becomes the trend, the model is sliced with the H2C multi-nozzle printer by default. For other models, please refer to your own model for slicing preview to check the time and filament consumption.
5. Thank you again for the recognition and support from fellow enthusiasts. I hope to receive your likes and boosts. In 2026, let's unlock more F1 models together!

【Read Before Printing!!! Warm Tips】

It is strongly recommended to print the single-color configuration first before printing the multi-color configuration to test the model structure and slicing effect (Cost of single-color model printing: 64 scale 15g filament, 2 hours. 43 scale 50g filament, 3 hours). After being satisfied with the model's appearance, articulated structure, and slicing effect, then print the multi-color version. Thank you.

Note: Before printing the multi-color configuration file, you can enlarge it according to the complexity of the paint scheme. Preview in the slicing software to check the details and ensure printability.

---------⇪3D Printing Instructions-----------⇩ Product Introduction--------------

A racing car that a friend who loves small-scale car models repeatedly requested feedback on, and the final effect is indeed stunning.

The Koenigsegg Jesko is a brand new supercar released by Koenigsegg at the 2019 Geneva International Motor Show,

It is the successor to the Agera RS, and a road-legal track-focused model built for extreme performance.

Model Instructions

- Includes single-color and multi-color print profiles: single-color can be painted and decaled. Multi-color print profiles can be printed directly (uses more filament, takes longer), or can serve as a reference for single-color painting.

- Wheels are movable, assembly requires no glue.

- You can replace the abundant wheel hubs under this account, browse the homepage, and download your favorite wheel hub styles.

Dimensions

- 1/64 scale

- 1/43 scale: simply scale the model to 150% for clearer details.
- Sliced files use minimum printer size settings. You can adjust the number of models printed at once according to your printer size to save time and filament.

FDM Print Settings

- The physical model was printed using an A1 mini with a 0.4mm nozzle, 0.12mm layer height, and official PLA. Better results can be achieved using equipment, parameters, and filament with higher specifications (assembly might be too tight or too loose, which can be compensated by adjusting the XY outer contour dimensions of the assembly parts, or by using sanding tools and 409 glue for processing and connection).
- Infill density: 15%. To give the model a heavier feel, the infill density can be adjusted to 100%.
- Supports: A combination of normal and tree supports was used.

- Various painted versions will be released later, follow the account to get updates as soon as possible.

- You can also adjust the parameters and print according to your own printing experience.

Support Removal Instructions

- The model size is small, and supports have been added at key positions. Removing supports requires the use of side cutters and tweezers. Breaking by hand will likely cause structural damage, especially to the rearview mirrors and rear wing parts.

- Tip: To ensure successful removal of multi-color model supports and avoid breakage, you can first print a single-color model for practice to understand the model and support structure, then remove the supports from the multi-color model (if broken, 409 glue can be used for connection).

Single-Color Painting Reference

- Sanding: (Optional) Sand in the order of 400-600-800 grit.

- Coloring: Use acrylic paints with a brush (for issues with layer lines bleeding at edges, you can first paint the main color over a large area, then paint the edges).

- Polishing: Use a flannel cloth for sanding and polishing to make the acrylic paint shine.

Assembly Instructions

- For long-term stability of the wheels, moderate force is required for installation, and the first rotation will be quite tight. After playing with it a few times, it will become more flexible. See the GIF demonstration for wheel installation.

- To facilitate the installation of wheel calipers, a wheel caliper installation tool has been specially designed and produced. Link: 64 Scale Wheel Caliper Installation Tool from SAMPAN棱界复刻 - MakerWorld

Visit the author's homepage to see all vehicle models, welcome to like and follow!

Hope to see more friends share your printing photos, I'm curious what kind of works you will print!

We will continue to release various high-precision 3D printed vehicles, thank you for your attention and support!

China site:https://makerworld.com.cn/zh/@sampan1120
International site:https://makerworld.com/zh/@sampan1120