FF1 Crawl Refrigerator Magnet
Print Profile(1)
Bill of Materials
Description
Crawl
This is a HueForge of the monster Crawl from Final Fantasy 1 for NES, stacked on a base with holes for magnets.
Magnet Size: 6 x 2mm
If you want to use a different magnet diameter, resize the discs in the project file to .04mm larger than your magnet. For example, if you have 5mm magnets, resize the discs to 5.04 x 5.04 x 2mm. The magnets should stay by friction, but, if you're having trouble, a dab of glue will suffice.
HueForge details:
Project: FF!_Crawl.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 70x70mm in size
Filaments Used:
#000000 PLA Sunlu Black Transmission Distance: 0.3
#695fa2 PLA Anycubic Purple Opulence Transmission Distance: 2.7
#06924d PLA PolyLite Green Transmission Distance: 1.3
#ffffff PLA+ Anycubic Brilliant White Transmission Distance: 1
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Purple Opulence
At layer #17 (1.44mm) swap to Green
At layer #21 (1.76mm) swap to Brilliant White for the rest.
Boost Me (for free)
Feel free to Boost Me if you want. Otherwise, enjoy the print!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)