Jagdpanzer E100 Super Heavy Tank Destroyer 1:35
Print Profile(3)
Description
If you enjoy my work, consider supporting me ❤️ ❤️ ❤️
Buy Me a Coffee: buymeacoffee.com/bavaria3 | Ko-fi: https://ko-fi.com/bavaria3
Boost Me (for free)
Don’t miss out — follow me for more top-quality tank models!
Don’t miss out — follow me for more top-quality tank models!
I'm a creator based in Ottawa, Canada. All models are originally designed from scratch in Fusion 360, physically tested and verified with my own printing setup - no AI tools are used in any part of the design process. Each work undergoes repeated revisions to guarantee reliability and usability.
I began working full-time in May, giving me much less free time for design creation than my student days. Your ongoing boost support powers my creativity and pushes me to keep delivering consistent, high-quality updates!
Feel free to give me a boost, like, save, and leave your comments if you enjoy my work. Your valuable boost is the core motivation for my creation, helping me continuously polish and update high-quality designs.
================================
📋 Recommended Print Settings (For Best Results)
- Filament: PLA. Different materials have different shrink rates, so using other filaments might cause fitting issues or dimensional errors during assembly.
- Slicer: Bambu Studio. I recommend using my default profile — I’ve tuned it specifically for this model.
- Ambient Temperature: If you’re using an open-frame printer like the A1 or A1 Mini, keep your room above 20°C (68°F) to prevent warping.
- Print Bed Preparation: Wash with soap and water, then dry thoroughly to ensure good adhesion. For small parts, apply a glue stick for better bed adhesion.
🔧 Assembly Diagram Notes
- You’ll need super glue to attach all the components together. This is an early build of mine, so all the wheels need to be glued in place.
The 4 squares and the 2 round plates are the heat-dissipation mesh above the engine, which you can print using a dark-colored material.
Additionally, you can use Bambu Lab’s software to set the top shell thickness to 0, choose “Grid” for the infill pattern, and set the infill density to 50%—this will simulate the mesh effect.
==========================
I added a version with a tank side skirt.
Like the e100 tank I previously published, if printing vertically is difficult for you, try turning them horizontally, although this requires additional support.
================================
Boost Me (for free)
If you like my work, consider leaving a boost — it really helps me keep creating more exciting models!
Membership
A lot of you have asked about selling prints of my models. If you want to use my designs commercially, just sign up for the commercial license membership — you can click this box to subscribe directly.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (69)