VFC G36 PMAG magazine Shell
Print Profile(2)
Description
Boost Me (for free)
Boost me for free to support my designs :) I am always open to criticisms and ideas!
Pmag style magshell for the VFC g36. Comes with baseplate, and 2 versions, full and windowed
Also comes with the window cutout stl for those who want to experiment with multi-material, or different print settings in the window area.
Print upside down for material savings. If doing multi-material with the window, prefer standing upright, as the filament cost of the purge tower skyrockets due to the increased height of the window (You may be able to change settings to combat this. I never tried.)
If printing upside down, post processing may be needed.. It can be difficult to release the bolt with material not sanded/flat. Check the pictures for the area in question. This is not as big an issue if printing upright.
DO NOT MIX POLYCARBONATE AND PA. They will not adhere well and will compromise the model. Only use polycarbonate and abs/asa if multi-materialing high temp filaments.
Will add more material profiles if I test them.
Feedback appreciated :) DM me on discord for questions.
EDIT:
1.1 - Revised over-insertion stop on magazine shell. should be much more difficult to over-insert, albeit still possible.
-Added a new print orientation for strength/ease of support removal.
-Added a 5 magazine + baseplate plate to print. Pa6-cf
1.2 -Added a c02 compatible baseplate step file. Courtesy of Wasp in Heavy Recoil Club.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (28)