Skeletal Baby Dragon – Fantasy Print - Free 3D Print Model

Search models, users, collections, and posts

Disaster

Miniatures>Animals

IP Report

Print Profile(1)

All

P1P

X1E

H2D

A1 mini

X1 Carbon

P1S

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

1.7 h

1 plate

4.1(28)

Open in Bambu Studio

Boost

450

927

797

473

Released

Description

BeCarefull WHEN REMOVING SUPPORTS!!
Title: Skeletal Baby Dragon – Fantasy Print with Support

Description:
This baby dragon might be all bones, but it’s full of character. With sharp claws, hollow eyes, and detailed wings, it’s perfect for fans of fantasy, dragons, or unique prints.
Designed to be both fun and a little spooky, this piece looks great on a shelf or desk.

Printed and tested on Bambu Lab A1 – results are shown in the real photo.

Boost Me (for free)

Comment & Rating (33)

@SarkonCovasko

Print Profile

0.16mm layer, 2 walls, 15% infill

Really cool print! And it prints surprisingly well, but 1 star off due to how brittle it is and how impossible it is to remove the supports. I broke the first print I made just by bending the bed to try and get the model off. Pictured is my second print which was done at 200% scale.

The profile uploader has replied

@Disaster333

thanks for your comment

@user_4240392163

The print was mostly successful, except that it failed to print the lower jaw, which is a shame

Show original

@user_1858452650

Print Profile

0.16mm layer, 2 walls, 15% infill

the print was good but I found it really hard to get the supports off and ended up breaking its leg off plus the wings were very thin where they attach. I’ll try again though as have been me being heavy handed

The profile uploader has replied

@Disaster333

thanks 🙏

@user_4240392163

Tree supports are well-suited for this

Show original

@user_1590303595

Print Profile

0.16mm layer, 2 walls, 15% infill

very very filigree, you have to be very careful not to break anything

Show original

@user_1030409027

Print Profile

0.16mm layer, 2 walls, 15% infill

great print, be very careful removing the supports.

@user_901247039

Print Profile

0.16mm layer, 2 walls, 15% infill

really good but wings need extra support! snapped off.

@ged1122

love the print. I scaled it to 340% printed it twice and the jaw fell off. :(

@user_4078009574

Print Profile

0.16mm layer, 2 walls, 15% infill

as stated I had a hard time removing the support although a really nice dragon

@user_1249579315

Print Profile

0.16mm layer, 2 walls, 15% infill

It is really brittle, the supports broke off both wings and one arm without much pressure on my end. Design is really cool, will probably try again and be extra careful to see if I can do it without having any breakage.

@flamatrix99

Print Profile

0.16mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.