Search models, users, collections, and posts
Raw Force Hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
8 h
1 plate
Open in Bambu Studio
Boost
0
3
1
0
2
1
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 156.55x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal
At layer #10 (0.88mm) swap to Red
At layer #17 (1.44mm) swap to Lemon Yellow
Border Only Colors from here until the end.
At layer #23 (1.92mm) swap to Ivory White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (1)