Glidebait V2
Print Profile(3)
Bill of Materials
Description
Easy to print and build glidebait. 10 minute build time and great action! Build in air chambers.
At 100% scale the lure is 145mm long with 36g.
Boost Me (for free)
If you like my work, i would appreciate a boost ;)
What you need:
-5 stainless steel screwed eyes M2
EU: https://lureparts.nl/de/produkt/16-mm-schraubosen-aus-edelstahl/
US: https://www.lurepartsonline.com/Stainless-Screw-Eyes?quantity=1&custcol_other_style=9&custcol11=308 (3/4" .062" wire)
-1.2mm stainless spring steel wire
-superglue
-8mm sticker eye (cut in half)
-4x 2g lead balls https://tinylink.net/zJ3Lu
How to build:
-put the lead balls into the holes and fill them with epoxy
-add some super glue to the threads and screw in the 5 eyelets (us screws need to be shortened)
-don´t screw the eyelets on the joint all the way in. leave about 4mm
-use the 1.2mm wire to join the 2 parts and the fin to the tail
NOTE: These stencils have many and extreme overhangs, and removing the support is difficult, time-consuming, and requires sanding. If that's not worth it to you, you shouldn't print them!
Check out my other lures:
Membership
Want to sell prints of my models? This Commercial Membership grants you a license to all of my MakerWorld models!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (133)