Q-Version Hatsune Miku Figurine - Movable Head - Free 3D Print Model

Search models, users, collections, and posts

LJX

Miniatures>People

IP Report

Print Profile(2)

All

P1S

X1 Carbon

H2S

H2D Pro

X1E

H2D

A1 mini

P1P

P2S

H2C

X2D

A2L

90% variable layer height

Designer

7.9 h

1 plate

4.1(7)

0.2mm layer, 2 walls, 10% infill

Designer

8.1 h

1 plate

Open in Bambu Studio

Boost

254

199

Released

Description

Content has been automatically translated.

Show original

Articulated Hatsune Miku Figurine

The finished product stands approximately 11.5cm tall and requires glue for assembly

I experimented with numerous orientations to optimize aesthetics and printability

To achieve optimal frontal aesthetics, I undertook multiple iterations, creating four distinct heads alone

Conversely, less visible areas may exhibit minor imperfections

Variable layer heights have been implemented for the head, arms, heart, and hair, mitigating layer lines for a refined finish

I lacked suitable PLA filament; printing with PLA should yield superior results

Minor details were refined with a craft knife as shown in the images

As a 3D printed figurine, it presents a remarkably smooth and visually appealing result

Comment & Rating (10)

@iSleepy_ii

Print Profile

90% variable layer height

I liked this Miku figure too much but I had a problem when printing the legs detached from the skirt, I fixed it with some fomi x moldable so it looks a little strange, other than that the rest printed super well, good model I liked it

Show original

@sickfoo8

can you scale it to 90%?

The designer has replied

@lixni522

It has been scaled down to 90% for you, and the parameters have been re-tuned However, printing details might degrade after scaling down, you can try it out

Show original