Ich freue mich, dass es Ihnen gefallen hat. Sogar bei 50 %. Ihr Ausdruck ist großartig geworden.

I'm glad you liked it. Even at 50%. Your print turned out great

LKA Hueforges

Ich hab es um 50% verkleinert was man an der Schrift merkt jedoch vom Richtigem Abstand ist das dann auch relativ. 
Das bild ist echt top und schön zum hinstellen 👍

I scaled it down by 50% which is noticeable in the lettering but from the proper distance it is also relative The print is really great and nice to display 👍

3D_Karloprint

Could you do McQueen and Sally? would love to gift that to my husband. 😊

Billababe515

cover

20250604_141902.jpg

plate_1.png

2025-06-18_048ed0d4a83238.jpg

Project: Cars Hueforge&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm You may print at higher layer heights below the Min Depth of 0.56mm The Max Depth is 2.4mm and the Actual Depth is 2.2mm&nbsp;NOTE: I would change the Wall Generator to Arachne. It takes a while for the slicing time, so I had to leave it on Classic for the upload. Arachne does take longer, but gives better detail on hueforges. (You can leave it on Classic and see if that works the same.)&nbsp;The Model is 156.65x234mm in size. You can scale the X, and Y axes to fit your needs. (Make sure you DO NOT scale the Z axis)&nbsp;Filaments Used:     PLA Elegoo Black Transmission Distance: 0.1     PLA Elegoo Red Transmission Distance: 4.3     PLA Elegoo Yellow Transmission Distance: 4.7     PLA Elegoo White Transmission Distance: 3 This print uses 4 unique filaments&nbsp;Swap Instructions:     Start with Black     At layer #10 (0.88mm) swap to Red     At layer #14 (1.2mm) swap to Yellow     At layer #19 (1.6mm) swap to White for the rest.

0.08mm layer, 2 walls, 100% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>I would greatly appreciate a boost if you enjoyed this print. Also, consider checking out my other Hueforges on my channel. Thank you. </boostcontent></boostme>Project: Cars Hueforge&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm You may print at higher layer heights below the Min Depth of 0.56mm The Max Depth is 2.4mm and the Actual Depth is 2.2mm&nbsp;NOTE: I would change the Wall Generator to Arachne. It takes a while for the slicing time, so I had to leave it on Classic for the upload. Arachne does take longer, but gives better detail on hueforges. (You can leave it on Classic and see if that works the same.)&nbsp;The Model is 156.65x234mm in size. You can scale the X, and Y axes to fit your needs. (Make sure you DO NOT scale the Z axis)&nbsp;Filaments Used:     PLA Elegoo Black Transmission Distance: 0.1     PLA Elegoo Red Transmission Distance: 4.3     PLA Elegoo Yellow Transmission Distance: 4.7     PLA Elegoo White Transmission Distance: 3 This print uses 4 unique filaments&nbsp;Swap Instructions:     Start with Black     At layer #10 (0.88mm) swap to Red     At layer #14 (1.2mm) swap to Yellow     At layer #19 (1.6mm) swap to White for the rest.

Print Profile(1)

Description

Comment & Rating (4)

License

Related Models