Search models, users, collections, and posts
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
3.2 h
1 plate
Open in Bambu Studio
Boost
805
2244
117
29
1.3 k
725
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
The Model is 112.62x200mm in size
You may print at higher layer heights below the Base Thickness of 0.52mm
The Max allowed Thickness is 2.28mm and the Actual Thickness is 2.27997mm
Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#00358e PLA BambuLab Basic Blue Transmission Distance: 4
#0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.68mm) swap to Blue
At layer #13 (1.16mm) swap to Cyan
At layer #20 (1.72mm) swap to Jade White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Share Alike
Comment & Rating (117)