SCX10 Trans Mounted Electronics Plate
Print Profile(2)
Description
Boost Me (for free)
Please consider giving me a boost if this worked out well for you.
I installed a Hobbywing Fusion SE and it only left me with a receiver and power button to mount so I whipped this up to mount them easily. You will need 2mm longer m3 bolt for the top one ( make sure it's not too long or it will hit the slipper/slipper eliminator), a 4mm longer bolt for the bottom one that has a nut (this one can be any length, nothing to hit), and some double sided tape. The holes are to zip tie wires to if needed.
Disregard the random 3d printed rails, it is an aftermarket scx10 transmission in it.
I installed the bottom one with a nut first, you can have it pulled away from the transmission to tighten the bolt and nut easier. Then I hinged it down onto the transmission and did the top bolt.
Instagram: https://www.instagram.com/ckrcgarage
YouTube: https://www.youtube.com/@CKRC-Garage
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)