Magnetic Vise Jaws 67mm
Print Profile(1)
Description
I drew magnetic vise jaws for smaller bench vises. The present model has a wide of 67mm. If you need wider or narrower, write it to me in the comments and I could create the appropriate print profiles.
Boost Me (for free)
I would be very happy to receive a booster and a 5-star rating from you.
There is a pause in the print profile before Layer 74 starts. Now place magnets in the four recesses and then continue printing. The cutouts measure 11x11x2.5mm, I use square or round magnets with an edge length/diameter of 10mm.
Important:
The printhead contains magnetic parts. The magnets lifted slightly when I printed the cover over it. This worked fine for me, but I don't know how it will be for you. So please be extremely careful and watch the printer while it's positioned over the magnets. If necessary, you can glue the magnets in place.
Whatever you do and print, you do so at your own risk. I accept no liability for any damage.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)