Scizor mega

Heads up: This is a flawed model, difficult to assemble, and requires glue.

Assembly notes:

1. I used separate eye pieces because the one-piece eyes were always difficult to position on the build plate. After several attempts, I found the separate pieces provided better results. When assembling the separate eyes, the black portion of the eye that touches the print bed is the side adjacent to the blue inner part. It is recommended to separate the left and right eyes before assembly.
2. Each part is labeled in the file. For example, the red portions of the left and right claws are different, so refer to the print file to distinguish them. It's recommended to try assembling the parts without glue first to make sure of the fit before gluing.
3. The wings are particularly tricky. Separate the left and right wings first, then align them according to the wing holes and glue them together before attaching to the body. The outer edges of the red and white parts of the wings are flat.
4. I used a pen to blacken the inside of the claws before assembly. This can be attempted for a similar look to the pictures.
5. I wanted to film an assembly video, but I could not find a good angle so I gave up. If there is a need, I can try again.
6. Finally, I wish you all a happy day.