Modular Wrench Holder with Lables

Recently bought a new set of Icon combination wrenches from Harbor Freight and quickly realized how bulky and inefficient the plastic wrench trays they came in were. Couldn't even fit the 4 trays in a single drawers. I searched the typical sites for some modular wrench holders but none had everything I wanted, so I decided to make my own. I started with my Magnetic Tool Holder design and modified it for wrenches. They still use the same 12x3 magnets linked below that secures the holder to the drawer, but also secures the wrenches to the holder. For my Icon wrenches, I used mainly the small size, a few of the medium and just a couple of the large. I also made an XL version in case I wanted to use it down the road for even larger or adjustable wrenches. My recommendation would be to print 1 of each size to see what meets your needs. 

In addition, I also created some labels that simply press fit into the tops of the holders. With a .4 nozzle they printed pretty well but could be better with a smaller nozzle but were sufficient enough for me. You can use the included painting for the different color text or pause and swap colors at layer 11.

I included a blank label in case you don't want the lettering or incase you want to add your own text. For the text font, I used Arial Black incase you're trying to match. 

There is also a plate for finishing ends (1 front and 1 rear) that you can print that will allow you to use the labels for the very top or bottom. 

If you enjoy, make sure you like and send a boost if this helped you organize your tool box a bit better.