Spiderman Hueforge illustration
Print Profile(1)
Description
Hueforge inspired by the Marvel character, Spiderman. My profile features similar designs for Batman and Wolverine.
If the print time is daunting, fear not—scale the model proportionally along the X and Y axes, but ALWAYS maintain the original Z-axis dimensions. GOT IT?!
Project: SPIDERMAN2.hfp
Print with 100% infill and a 0.08 mm layer height, employing a 0.1 mm base layer.
The model measures 131.43 x 230 mm.
Higher layer heights are permissible, provided they remain above the minimum depth of 0.26 mm.
Maximum depth is 2 mm; actual depth is 2.1 mm.
Filaments used:
PLA Smart Recycled Black (Transmission distance: 0.5)
PLA Smart Dark Grey (Transmission distance: 8)
PLA BambuLab Basic Red (Transmission distance: 4)
PLA Sunlu Matte White (Transmission distance: 5)
This print utilizes four distinct filaments.
Filament Swap Instructions:
Begin with black.
At layer 8 (0.66 mm), switch to Dark Grey.
At layer 10 (0.82 mm), revert to black.
At layer 13 (1.06 mm), change to red.
At layer 17 (1.38 mm), transition to white for the remainder.
ENGLISH
Hueforge inspired by the Marvel character Spiderman. You can find the ones seen in the Batman and Wolverine image on my profile.
If printing time slows you down, don't worry, you can scale it by giving the same percentage to the X and Y axes, but YOU MUST ALWAYS RESPECT THE Z AXIS and leave the one provided in the file. UNDERSTOOD?!
Project: SPIDERMAN2.hfp
Print with 100% infill and a 0.08 mm layer height, with a 0.1 mm base layer.
The model measures 131.43 x 230 mm.
You can print with higher layer heights, below the minimum depth of 0.26 mm.
The maximum depth is 2 mm and the actual depth is 2.1 mm.
Filaments used:
PLA Smart Recycled Black (Transmission distance: 0.5)
PLA Smart Dark Grey (Transmission distance: 8)
PLA BambuLab Basic Red (Transmission distance: 4)
PLA Sunlu Matte White (Transmission distance: 5)
This print uses 4 unique filaments.
Swap Instructions:
Start with black.
On layer 8 (0.66 mm), change to Dark Gray.
On layer 10 (0.82 mm), change to black.
On layer 13 (1.06 mm), change to red.
On layer 17 (1.38 mm), change to white for the rest.
Boost Me (for free)
ANY SUPPORT IS GREATLY APPRECIATED It fuels the inspiration and motivation for more models within the captivating realm of 3D printing. Thank you!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)