WLED BOX–ESP32 D1 Mini/C3(Snap-Fit,Sound Reactive)

🧩 WLED BOX – ESP32 D1 Mini / C3 (Snap-Fit, Sound Reactive)

A precise, standard-compliant enclosure for WLED projects using the ESP32. Designed for makers who want to build it by the book, with proper components, clean wiring, and a durable snap-fit lid.

🔧 Features

Supported Hardware:

• ESP32 D1 Mini or ESP32-C3
• SN74AHCT125 logic level shifter (or compatible)
• INMP441 digital I2S microphone
• 3x SPL-1 / LT221 lever-style connectors (for VCC, GND, DATA)
• Internal cable management channels

Lid & Assembly:

• Snap-fit lid with alignment slot
• No screws or glue required
• Hot glue recommended for internal stabilization

🛠 Assembly Notes

• The level shifter is mounted on a small piece of perfboard/PCB, allowing for easier handling and soldering.
• Wiring follows the official WLED documentation (for both ESP32 and microphone).
• The case encourages clean, modular, and reliable connections.

📐 Case Details

• Front engraving: Rodic WLED Bare V1.0
• Compact and professional design
• Easy solder access to all components

🎯 Ideal For

• WLED installations with addressable LEDs (WS2812B / SK6812)
• Sound-reactive LED lighting
• DIY smart lighting setups
• Permanent or portable use

🖨 Print Settings

Layer height: 0.16 mm

Walls/perimeters: 2

Infill: 15%

Supports: ❌ Not needed

Brim/Raft: ❌ Not required

Orientation: Print as-is, no rotation needed

Printer type: FDM

Material: PLA or similar

🔄 Future Plans

Additional versions for other boards and configurations will be released in the future.