Cloth - Spiked edition 3D Printable Fabric Fidget

A small change from my design for Cloth, this thin and lightweight modular fabric incorporates spikes for a punk-rock appeal. Feel free to change filament to create extra cool effects! 

Each unit of the cloth is designed to give out after enough force has been applied, so that it does not permanently disfigure. It takes quite a lot of force, though, so the cloth can be handled normally. Multiple cloths can be snapped together in this way, to achieve unique and complicated geometry. Additionally, you can print hard body attachments to affix the cloth to wearable, decorative, or mechanical components.

I have published this item with Public Domain licensing. That means you are free to change, modify, and publish your creative pursuits without mentioning me.  However, you should note, I publish under this license only so that people can do anything they want without worrying about legal consequences. I would appreciate you listing yours as a remix or a shout out at the very least. 

Print Settings

120mms Max Speed - You don't want to knock one of these off the build plate :(

0.1 mm Layer Height - Gives you a nice smooth print that is loose fitting. 0.2 is possible but you have to work it a little before it gives you that cloth effect. 

0.4 mm Perimeter Width - On all settings, This gives you the precise width that I have modeled into the cloth. 

Elephant Foot OFF - I have modeled it with an effective elephant foot compensation which accounts for the perimeter width. 

Want to tip me a whole roll of filament? Click here for my Filament Wishlist!